SlimJim - a media centre case for Raspberry Pi and IGEPv5
SlimJim is a low profile case 3mm acrylic case in three flavours:
•
Raspberry Pi B+/2B/3B/3B+
•
Raspberry Pi 4B
•
IGEPv5
It lends iteself perfectly to being either a slimline desktop system for RISC OS, or a wireless media centre* for the Raspberry Pi, with space for
a 2.5in SSD and a front facing USB Hub with three external ports.
The case is engraved on the inside with the placement of the components, to make it easier for the builder to get the components in the right
place, and custom cut front plates allow the selected ports to be exposed. With extra venting slots on each side, the case can remain cool on
its own, but it has enough room inside for a Fan Shim, or a fan. The Elesar Wireless HAT for the Raspberry Pi running RISC OS can also
squeeze into the case.
You can buy the case alone, but if you’re buying it for a Raspberry Pi, you can also purchase a Connector Kit, containing everything you need
to connect up your desktop machine or media centre:
•
4 port USB Hub (one internal)
•
USB to SATA Drive cable
•
USB to Hub Cable
•
All required screws, spacers and nuts.
SlimJim comes as standard in clear acrylic, but other options are available for the more discerning user, including frosted, translucent, opaque
or even fluorescent colours. You can be as suble or as garish as you want! Stand out from the crowd or blend into the background - it’s up to
you.
Custom cases can even include specific cutouts for a power switch for the Raspberry Pi Media Centre - just tell us what you want and where
you want it!
Acorn and RISC OS Spares and Extras
by
SlimJim Pi 3
A clear acrylic SlimJim case with custom end
plate suitable for the Raspberry Pi
B+/2B/3B/3B+ range.
SlimJim Pi 4
A clear acrylic SlimJim case with custom end
plate suitable for the Raspberry Pi 4B 1GB,
2GB, 4GB or 8GB versions.
SlimJim IGEPv5
A clear acrylic SlimJim case with custom end
plate suitable for the iSee IGEPv5 development
board, ideal for RISC OS.
by
Media Centre Connector Kit
A Raspberry Pi Connector Kit, including a USB3
to SATA cable,4 port USB Hub and cable, and a
selection of screws and spacers for mounting
the Raspberry Pi, the 2.5in hard drive and hub
Custom Colour SlimJim
Pick a colour, any colour, and your SLIM JIM
will be made just for you!
Full Custom SlimJim
Change your colour, change your engraving,
change the design!
Want it your way? You got it!
* Wireless only available under RISC OS with an added extra, such as a Wireless HAT, PiFi or Wispy V
